[W126 Coupe] Penta or Split Widebody Wheels

Axel Wulff axelwulff at hotmail.com
Fri Nov 7 20:14:35 EST 2008



Oh, yeah, forgot about that.

8mm for the heads and 10mm for the nuts, both the OZ proprietary 10-point design.
Regards,Axel J. Wulff610-731-5453 Cellular610-572-4611 Home



Date: Fri, 7 Nov 2008 20:06:47 -0500From: jhodgman at gmail.comTo: mbcoupes at mbcoupes.comSubject: Re: [W126 Coupe] Penta or Split Widebody WheelsDon't forget the OZ bolts are proprietary so you'll need a special set of sockets to get them apart.. I picked my set up a couple of years ago..160+ shipping from das vaterland!Jonathan
On Fri, Nov 7, 2008 at 7:51 PM, Axel Wulff <axelwulff at hotmail.com> wrote:

Jay, That is the beauty of 3-piece rims, you can build them to any width you like. The inner rim is 7" wide on both the front and the rears. The centers determine the offset and the outer rim can be switched to narrow or widen the rim. I don't remember exactly what you need for the widebody, but to build the rear rims to 12" width you replace the 3" piece for a 5" outer rim. Well, maybe not that simple. You have to undo the 35 bolts holding the rim together, then remove the center, then split the inner rim from the outer rim with a really sharp knife, mate up the new outer rim with the inner with a good adhesive and put the center back in with the 35 fasteners. Easy as pie.Regards, Axel J. Wulff > From: jaymanek at hotmail.com> To: mbcoupes at mbcoupes.com> Date: Fri, 7 Nov 2008 12:09:13 +0000



> Subject: Re: [W126 Coupe] Penta or Split Widebody Wheels> > Thanks,> > Yes I don't mind the Splits but haven't seen any wide ones for ages!> > > Many Thanks & Regards> > Jay Manek | www.mercland.com| 07716 349949> > --------------------------------------------------> From: "Axel Wulff " <axelwulff at hotmail.com>> Sent: Friday, November 07, 2008 12:01 PM> To: "Mercedes Coupes Mailing Lists " <mbcoupes at mbcoupes.com>> Subject: Re: [W126 Coupe] Penta or Split Widebody Wheels> > > Jay,> >> > Finding the extra-wide Pentas for the widebody will either require some > > very patient and dedicated trawling of the German eBay, or a stroke of > > luck.> >> > A different option would be to buy a set of the 3-piece rims (the ones > > that crack, I know from personal experience....), and buy the wider outer > > rims to replace the standard outer rims (1.5" in front and 3" at the > > rear). I've seen these available on the German eBay.> >> > Cheers,> > Axel> >> > -----Original Message-----> > From: Jay Manek <jaymanek at hotmail.com>> > Sent: 11/7/2008 11:36:09 AM> > To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>> > Subject: [W126 Coupe] Penta or Split Widebody Wheels> >> >> > Hi All,> >> > Does anyone know of any Pentas or Splits to fit an 89 Widebody please?> >> >> > Many Thanks & Regards> >> > Jay Manek | www.mercland.com| 07716 349949> >> >> > The MB Coupes Website!> > W126 SEC Mailing List> > Postings remain property of MB Coupes, L.L.C.> > The MB Coupes Website!> > W126 SEC Mailing List> > Postings remain property of MB Coupes, L.L.C.> > > The MB Coupes Website!> W126 SEC Mailing List> Postings remain property of MB Coupes, L.L.C.The MB Coupes Website!W126 SEC Mailing ListPostings remain property of MB Coupes, L.L.C.-- Blue Ridge Mercedes/AMG EastOffering Enthusiast Service, Restoration and Modification.Providing quality parts to discriminating customers in all parts of the world.Located in the Greater Atlanta area.http://www.blueridgemb.com404 805 13571996 S600 Euro "Scharnhorst"1991 560 SEC Full Euro ECE1991 560 SEC 226Hp/271ft/lbs:)1989 560 SEC AMG (N.Amer 250/295)1986 560 SEL AMG 6.0L 32V1980 280 SE Euro1978 300D TMU1987 560 SEL 162K Midnight Blue on Gray RIP:(2006 Z4 3.0Si M spec 6sp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20081107/59868b31/attachment.html>


More information about the MBCOUPES mailing list