[W126 Coupe] Transmission?

[Jonathan Hodgman]

You can't check the B2 piston with out taking it out of the car.

Jonathan


On Fri, Jul 4, 2008 at 1:23 PM, <terrako at comcast.net> wrote:


>

>

>

> Hello Guys,

>

>

> I have a 87 560-SEC, while driving I came to a stop light, car is the drive

> position. When I hit the gas to accelerate , the engine reved but the car

> did not move. I put the car in reverse and the reverse gear worked fine.

> Long story short,  Good Buddy Jonathan suggested that the B2 Piston was

> probably gone, I hoped.  I had a very reliable mechanic look at the car and

> he stated the B2 piston was fine and that that he could not find anything

> wrong other than I was a little low on transmission fluid, and that the

> insulation around or above transmission housing was worn and lose.

> He suggested I get the rear seal done, but the B2 piston was not leaking and

> he did not detect any issues with the transmission. Your feed back would be

> greatly appreciated.

>

>

> Terrako Stallings

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>




-- 
Blue Ridge Mercedes/AMG East
Offering Enthusiast Service, Restoration and Modification.
Providing quality parts to discriminating customers in all parts of the
world.
Located in the Greater Atlanta area.
http://www.blueridgemb.com
404 805 1357

1996 S600 Euro "Scharnhorst"
1991 560 SEC Full Euro ECE
1991 560 SEC 226Hp/271ft/lbs:)
1989 560 SEC AMG (N.Amer 250/295)
1986 560 SEL AMG 6.0L 32V
1980 280 SE Euro
1978 300D TMU
1987 560 SEL 162K Midnight Blue on Gray RIP:(
2006 Z4 3.0Si M spec 6sp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20080704/9545c100/attachment.html>