[W126 Coupe] hirschmann wiring

[Jonathan]

Ah yes, but is this the generic Hirschman from China or the Real bugger 
that's still made in Germany?

Your best bet is get back there w/ a test light and have someone turn 
the radio on and off.  I'm assuming your car is pre 91 and still has the 
antenna switch in which case make sure it is at max height as you will 
likely lose your antenna level adjustment with this new antenna.

Jonathan

toelsner at comcast.net wrote:

> I finally got around to putting in my new Hirshmann antenna assy (yes 

> it is a real Hirschmann) and see there is a wiring issue. The original 

> is 5 wires and the new one is 3 wires. Does anybody know which wires 

> should be tied together or numbers changed ? Wiring is as follows:

> Old                                                 New

> Pin 1  Blue/Yellow

> Pin 2 Red & Red/White (tied)          Red

> Pin 4 Blue/Green                             White

> Pin 5 Blue/White

> Pin 6 Brwn                                      Black

>  

> Thanks

> Tom Oelsner

> ------------------------------------------------------------------------

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.



-- 
Blue Ridge Mercedes
Offering Enthusiast Service, Restoration and Modification.
Providing quality parts to discriminating customers in all parts of the world.
Located in the Greater Atlanta area.
http://www.blueridgemb.com
*Updates weekly*

1996 S600 Euro "Scharnhorst"
1991 560 SEC Euro ECE Conv. (for sale)
1991 560 SEC 226Hp/271ft/lbs (TT conversion IP)
1989 560 SEC Euro ECE *Parts*
1988 300 TE
1989 560 SEC AMG (Mech.lifter/radical cam conv.)
1987 AMG Hammer 6.0L 32V
1986 560 SEL 6.0L 32V AMG
1980 280 SE Euro
2006 Z4 3.0Si M-Spec

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20080216/92c47e26/attachment.html>