[W126 Coupe] Warm up regulator??

[rider tn]

Mr. Spellman thanks for the help, really nice to be part of this great group of folks. 
Regards, Cecil Elliott



Date: Wed, 10 Dec 2008 23:02:57 -0500From: dick.spellman at gmail.comTo: mbcoupes at mbcoupes.comSubject: Re: [W126 Coupe] Warm up regulator??Cecil,Warm-up regulator on the 84 is to the left of the distributor right up near the air cleaner housing.  Pretty much follow straight back from the oil dipstick and you'll be on top of it. In 84 it would be electrical and perhaps vacuum controlled.  You need to read the specific model year spec for the 84.  MB made numerous revisionsduring these early years and they included the warm-up regulator.  If you have a problem, Bellamy will be the best source of info.Thermo-time switch is a sender unit bolted to the head that typically has two vacuum lines that plumbed into it.Regards,Dick
On Wed, Dec 10, 2008 at 8:36 AM, rider tn <ridertn at hotmail.com> wrote:

Hello Gents just wanted to ask in this forum about 1984 380 SEC about a warm up regulator, just wanted to check it if possible while I am replacing the injectors. Jonathan I wanted to follow your steps, but needed to know the location of the warm up regulator, is this item the vaccum thermo time switch by chance? Thanks for any help. Cecil Elliott 1984 380 SEC Euro
_________________________________________________________________
Send e-mail faster without improving your typing skills.
http://windowslive.com/Explore/hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_speed_122008
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20081212/99ea9197/attachment.html>