[W126 Coupe] diff removal

[terrako at comcast.net]

Problem,  Car will not start, unless you jump start, once car is started, the radio is in and out, the lights dim slightly, and ABS light comes on. Only stars after being jumped. I am thinking the Altenator,or  Overlaod Rely? How can a determine?

--
Terrako Stallings

-------------- Original message -------------- 
From: "Markus Meyer" <mfm at meyerprobateproperties.com> 

Thanks.  Its a 12mm, borrowed it from my mechanic.  Turns out a 12mm allen isn't the same size as a 12mm triple square!

Got it loose, now to take off the axles, which turns out are the same bolts!

Markus Meyer
mfm at meyerprobateproperties.com
http://www.meyerprobateproperties.com/
Meyer Probate & Properties, LLC
484-919-9762


-------- Original Message --------
Subject: Re: [W126 Coupe] diff removal
From: "Jason Mavris" <mavris2 at comcast.net>
Date: Thu, July 31, 2008 5:54 pm
To: "Mercedes Coupes Mailing Lists" <mbcoupes at mbcoupes.com>

 
You can look here and this will show you bolts and tool.    

http://en.wikipedia.org/wiki/Triple_Square_screws

Jason 
----- Original Message ----- 
From: title=jhodgman at gmail.com onclick="return true;Popup.composeWindow('pcompose.php?sendto=jhodgman%40gmail.com');; return false;" href="mailto:jhodgman at gmail.com" target=_blank>Jonathan 
To: title=mbcoupes at mbcoupes.com onclick="return true;Popup.composeWindow('pcompose.php?sendto=mbcoupes%40mbcoupes.com');; return false;" href="mailto:mbcoupes at mbcoupes.com" target=_blank>Mercedes Coupes Mailing Lists 
Sent: Thursday, July 31, 2008 10:16 AM
Subject: Re: [W126 Coupe] diff removal


It's not a Torx...it's more of a triple square.  Matco/snap on/Mac etc would have it..  Maybe Napa..

Jonathan
Markus Meyer wrote: 
I did run to Sears as I wrote, but they didn't have anything like it.  Unless I'm mistaken, I thought Torx heads were a star with 6 points, not 12 points?  If you took a 9 or 10mm 12pt socket and looked at it, that's what the hole in this bolt looks like.  Unless there are also 12pt Torx bits?  But still, I don't want to buy a bunch of Torx bits just to figure out what size this sucker is...


Markus Meyer
mfm at meyerprobateproperties.com
www.meyerprobateproperties.com
Meyer Probate & Properties, LLC
484-919-9762


-------- Original Message --------
Subject: Re: [W126 Coupe] diff removal
From: "Day . Ralph" mailto:RDay at drc.com
Date: Thu, July 31, 2008 8:41 am
To: Mercedes Coupes Mailing Lists mailto:mbcoupes at mbcoupes.com


Sounds like a Torx head to me.  You can find them at Sears or any tool store.

Ralph D. Day
Senior Program Manager/ASQ LSS Certified Black Belt
Dynamics Research Corporation
(703) 553-6852 (office)
(301) 275-9030 (cell)

From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com] On Behalf Of Markus Meyer
Sent: Thursday, July 31, 2008 8:27 AM
To: mbcoupes at mbcoupes.com
Subject: [W126 Coupe] diff removal

I'm trying to remove the diff from one of my 126 parts cars (88 SEC). The two front bolts are allen bolts and I got them out. But the larger rear one is a star shaped bolt - any idea the exact size (I think its around a 9mm?) and where the heck I can get the bit/tool that fits in there? I ran to Sears just as it was closing last night when I realized I needed a special part (I was afraid of using an allen key and rounding it out) but they didn't have any star shaped bits (its not the socket bit I need - its not a bolt head, its a hole which is star shaped).

Thanks,
Markus Meyer
mfm at meyerprobateproperties.com
http://www.meyerprobateproperties.com/
Meyer Probate & Properties, LLC
484-919-9762


The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C. 

The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C.



-- 
Blue Ridge Mercedes
Offering Enthusiast Service, Restoration and Modification.
Providing quality parts to discriminating customers in all parts of the world.
Located in the Greater Atlanta area.
http://www.blueridgemb.com/
*Updates weekly*

1996 S600 Euro "Scharnhorst"
1991 560 SEC Euro ECE Conv. (for sale)
1991 560 SEC 226Hp/271ft/lbs (TT conversion IP)
1989 560 SEC Euro ECE (*parts*)
1989 560 SEC AMG (6800RPM Mech.lifter/radical cam conv.)
1988 300 TE (Mosselman TT awaiting install)
1988 560 SEC AMG Euro ECE
1987 AMG Hammer 6.0L 32V
1986 560 SEL AMG 6.0L 32V 
1980 280 SE Euro
2006 Z4 3.0Si M-Spec






The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C.


The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20080802/539d1e93/attachment.html>
-------------- next part --------------
An embedded message was scrubbed...
From: "Markus Meyer" <mfm at meyerprobateproperties.com>
Subject: Re: [W126 Coupe] diff removal
Date: Thu, 31 Jul 2008 23:00:29 +0000
Size: 631
Url: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20080802/539d1e93/attachment.mht>