[W126 Coupe] T bolt on Tranny

[Dick Spellman]

Bob Rodgers wrote:

>  Dick Spellman, I have a not from you from last year about adjusting 

> the transmission with the T on the right side.  I went under and found 

> it and the T comes right out of the red plastic housing it's in , but 

> after turning it 1 detent nothing happens.  I was able to just take 

> the T out and move it 1 click.  Is that all that has to be done?  or 

> do I use the little T wrench to turn it.  Help?

> Bob Rodgers

> ------------------------------------------------------------------------

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

Hi Bob:

Just follow Jonathan's advise if you are experiencing flaring between 
gears.  I've been able to make subtle adjustments with just a few clicks 
CW and not being a pro wrench, I've always done that adjustment 1 click 
at a time until I got it right.  CW decreases the flare, CCW will 
increase the flare.  Jonathan being a pro has a lot more experience with 
how far you can turn that key than I.

All of this presumes that you are getting the right shift points, if not 
then the Bowden cable is what you should be adjusting.

Take care,
Dick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pairlist.net/pipermail/mbcoupes/attachments/20070113/a8d4723f/attachment.html