[W126 Coupe] Emissions question
Robert Karl Stonjek
rstonjek at bigpond.net.au
Sat Feb 24 03:32:43 EST 2007
Hi,
just for the record, the results for my 560SEC Euro '87 were:
ppm vol HC 168
% vol CO 2.100
% vol CO2 12.44
% vol O2 0.39
The Euro version has no cats, O2 sensor etc and I subsequently found that the fuel injection computer was faulty. I have not had it retested since the CIS-E was repaired.
If CO can be trivially added to CO2 then mine at 14.54 is lower than yours at 15.5. This would seem to indicate that your cat isn't doing much.
Note that if you started out with a Euro model without cats and added them, that you may have to change the CIS-E as well as the Euro version may ignore the O2 sensor. The Boshe part numbers are different for the two versions.
There's no legal minimum in my neck of the woods...
Robert
Hello All:
The following are the test results of the emissions test performed this afternoon on my 85 Euro 500 SEC:
25/25 test 50/25 test
reading allowed result reading allowed result
HC ppm 212 137 Fail 216 140 Fail
CO % 1.86 0.87 Fail 1.85 0.79 Fail
NOx ppm 1028 956 Fail 1036 1046 Pass
RPM 1302 2500 max 1357 2500 max
CO+CO2 % 15.5 6.0 min 15.5 6.0 min
The following items are new: 8 fuel injectors w/ air tubes, Beru spark plugs, Beru ignition wires, Distributor cap and rotor button, ICM and various vacuum hoses and vacuum connector, 1 can BG 44 intake system cleaner.
The car now runs great. Just can't seem to satisfy the clean air nazis in this state. Is the mixture too rich?
Any ideas how to rectify this situation? Oh yeah, the car does have catalytic converters.
Rich Jaffe
85 Euro 500 SEC 259K
83 300 SD 192K
--------------------------------------------------------------------------------
The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pairlist.net/pipermail/mbcoupes/attachments/20070224/20585ea1/attachment.html
More information about the MBCOUPES
mailing list