[W126 Coupe] Tranny Adjustment

[Richard Hesek]

Bob wrote:
 "Hey Dan, word of caution,  when you remove the small rubber cap you will
see the small T , use to turn the adjustment.  Just pull the small T wrench
out a quarter of an inch. the turn it.  You will feel a little pressure as
you turn it.  I just finished adj. mine and I had to adjust it about 5
turns before it shifted smoothly.  It really is easy!".

Bob Rodgers

  Five TURNS Bob! Not five notches?
 Your modulator pressure may be too high. This is not good. The pump and
valves will be stressed.
 Were you adjusting a newly replaced modulator and had to start from "0" or
were you just trying to improve the shift of an existing set up?
  Something else is out of whack if you needed five turns on the mod to
smooth out the shift.

Rick Hesek