[W126 Coupe] Conversion 380 to 500euro

[Dick Spellman]

Good information Dave.  Thank you.  I've had Jonathan provide some good 
detail as well.

\Dick
David G. Cole wrote:

>Dick,
>
>If you care considering doing a possible bore change, might also consider
>dropping in the crank & rods from a 560. The bores between the two motors
>are the same, only the crank / rods / pistons are different. And if you
>bored out to a 100mm bore (NOT recommended due to wall thickness, or lack
>of, issures) then you have yourself a 6.0 motor.
>
>Dave
>