[W126 Coupe] Dashboard Readout modification

[Vance Rowley]

Thanks Markus, but unfortunately, same problem. No cutout for the ASR triange.

Regards,
Vance.
  ----- Original Message ----- 
  From: Markus Meyer 
  To: mbcoupes at mbcoupes.com 
  Sent: Saturday, February 04, 2006 2:39 AM
  Subject: Re: [W126 Coupe] Dashboard Readout modification


        Here is another place to get them from:

        http://www.nrauto.com/sub_index.asp?spage=Gauges

        Markus

        --- On Fri 02/03, Vance Rowley < vance.rowley at tiscali.co.uk > wrote:


          From: Vance Rowley [mailto: vance.rowley at tiscali.co.uk]
          To: axelwulff at hotmail.com, mbcoupes at mbcoupes.com
          Date: Fri, 3 Feb 2006 23:19:40 -0000
          Subject: Re: [W126 Coupe] Dashboard Readout modification

          Thanks Axel (and Jay) I contacted Performance Products but they don't have the Gauge Faces for a Euro 560 SEC. The biggest problem seems to be the ASR triangle is only on the Euro version of this car. The guy I spoke to also recons the diameter is slightly different on a Euro as well. So no luck there. But thanks anyway. 

          Anyone know where to get the Euro version Gauge Faces? preferably with the ASR triangle cut-out and Speedo calibrated in both MPH and KPH. Or if there is one with just MPH, I would settle for that right now.

          Cheers,
          Vance.
       



------------------------------------------------------------------------------
   


------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pairlist.net/pipermail/mbcoupes/attachments/20060204/6b29a24e/attachment.html