[W126 Coupe] Exhaust manifold bolts?

[Gary]

just went to their site   have your tried their internal engine cleaner?

Steve Nervig <dakota at mac.com> wrote:  Kroil is the best. ;-) From KANO Laboratories. www.kanolabs.com/>

Now what do you think is better, something from a Laboratory or 
something out of a Bathtub?

JK,
Steve



On Aug 21, 2006, at 8:36 PM, Mike R. wrote:

> Thanks Mike. You and Jonathan told me to get some PB Blaster, so I've
> ordered a can. The only good thing about working out of town is 
> that I can
> get stuff off eBay. The can will be home before I will.
>
> Later,
> Mike R.
> (702) 494-8056
>
> -----Original Message-----
> From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes- 
> bounces at mbcoupes.com]
> On Behalf Of dolans1 at verizon.net
> Sent: Monday, August 21, 2006 7:57 PM
> To: Mercedes Coupes Mailing Lists
> Subject: Re: Re: [W126 Coupe] Exhaust manifold bolts?
>
> Mike,
>
> pbblaster.com, the only lubricant! I used it to remove a spark plug 
> from my
> 500 euro. The plug was almost welded, will do the trick for you. 
> Spray on,
> let it sit over night, repeat, ect...
>
> Regards,
> Mike.
>
>
>
>> From: 
>> Date: 2006/08/21 Mon PM 05:17:00 CDT
>> To: Mercedes Coupes Mailing Lists 
>> Subject: Re: [W126 Coupe] Exhaust manifold bolts?
>
>>
>>> From: "Mike R." 
>>> Date: 2006/08/21 Mon PM 05:17:00 CDT
>>> To: 'Mercedes Coupes Mailing Lists' 
>>> Subject: [W126 Coupe] Exhaust manifold bolts?
>>
>>>
>>> I need to remove the exhaust manifold from my ’87 SECM117engine. The
> exhaust has been on there from day One and the nuts are verylikely 
> rusted in
> place. With my air gun, I can get them out – correct sizedsocket (6- 
> point)
> and set the gun to max torque, they’re coming out or I’lltwist the 
> stud
> either out of the block or in two. I’d expect that woulddamage 
> something.
> What worries me the most is a steel stud stuck in the aluminumhead 
> and I
> pull the threads out of the head when the stud comes out. It 
> wouldbe great
> to just get the nuts off the studs, but I’m not sure they’llwant to 
> come
> loose.
>>>
>>> Any tricks to this so that I don’t have to re-tap the heads?Is 
>>> there some
> Industrial Strength “liquid wrench” stuff that shouldbe used here?? 
> Heat
> from a torch? Use the air gun (impact wrench) gently in andout to 
> try to get
> the nut to thread off the stud??
>>>
>>> Thanks,
>>> Mike R.
>>>
>>>
>>>
>>> The MB Coupes Website!
>>> W126 SEC Mailing List
>>> Postings remain property of MB Coupes, L.L.C.
>
> The MB Coupes Website!
> W126 SEC Mailing List
> Postings remain property of MB Coupes, L.L.C.
>
> The MB Coupes Website!
> W126 SEC Mailing List
> Postings remain property of MB Coupes, L.L.C.

--
I feel so much better now, since I gave up hope.





The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pairlist.net/pipermail/mbcoupes/attachments/20060821/4ec30816/attachment-0001.html