[W126 Coupe] CIS-E/KE Units - the import trap...

[Chris Schafer]

Hi Robert,

Here are some links that you might find interesting.

Right up the road you are on is this book. (I have a copy.)
http://www.amazon.com/gp/product/0760315825/sr=1-1/qid=1144002187/ref=sr_1_1/002-9244287-1440839?%5Fencoding=UTF8&s=books

Bosch has a book on sensors. It has a lot of information in it but of course it lacks schematics. Perhaps you could modify the behaviour of your control unit by modifying the signals it receives.
http://www.amazon.com/gp/product/0837610877/sr=1-1/qid=1144002360/ref=sr_1_1/002-9244287-1440839?%5Fencoding=UTF8&s=books 

And here is just something that might give you some good ideas.
http://www.megasquirt.info/v22manual/mintro.htm

Regards,
Chris Schafer

  ----- Original Message ----- 
  From: Robert Karl Stonjek 
  To: MB Coupes 
  Sent: Friday, March 31, 2006 9:26 PM
  Subject: [W126 Coupe] CIS-E/KE Units - the import trap...


  Hi guys,
  I think I've got it figured out, but am no closer to actually fixing it just yet.  There are several different Jetronic units (also known as KE unit or CIS-E unit).  The numbers tell all.  Even numbers are replacement versions, odd numbers are the originals.  All have the same first 7 digits vis
  0-280-800-
  the last three digits vary from country to country and version to version.  There are two models of 560SEC listed in the BOSCH ESI[tronic], which is where I got this info from: the 220kW and 178kW.  The later version has a cat.

  The USA numbers are:
  up to 8/87
  0-280-800-172 (Replacement)
  0-280-800-173 (Original)
  from 9/87
  0-280-800-278 (Replacement)
  0-280-800-279 (Original)

  Exchange version is 0986-261-859

  The European and Australian versions are:
  up to 8/87
  0-280-800-120 (Replacement)
  0-280-800-121 (Original)
  up to 8/87
  0-280-800-258 (Replacement)
  0-280-800-129 (Original)

  The high power not cat version is:
  0-280-800-156 (Replacement)
  0-280-800-157 (Original)

  The later versions (post 9/87) are for higher compression motors (10:1 rather than 9:1) hence the different box.
  Mine is the high power, no cat version, but I found 0-280-800-120, which is giving me trouble.  The High Power version was never sold in Australia.  All those that do exist have been imported from Hong Kong or the UK.  As the unit in my car is a replacement version, it is pretty obvious that it has been replaced in Australia.  The original, which would have been a 0-280-800-157, is nowhere to be found.  A closer match would have been the high compression version, the 0-280-800-258, but even this one would have been looking for a non-existent oxygen sensor.

  Even the EProm is wrong in the unit I have - it is 2287355758 and should be a 2287355316

  Well, now I know where the problem lies, I can look at trying to pick up a second hand unit.

  That's a whole lot of single-use knowledge I could have done without :(

  Robert


------------------------------------------------------------------------------


  The MB Coupes Website!
  W126 SEC Mailing List
  Postings remain property of MB Coupes, L.L.C.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pairlist.net/pipermail/mbcoupes/attachments/20060402/9ce0bc79/attachment.html