[W126 Coupe] need bolts for 25mm spacer

[Edmund Conran]

do you know the H&R part no. for the sec?

All the best,

Ned

On 23 Jun 2005, at 21:10, Sam Sisic wrote:

> "The safety concern"??
> Especially for someone who likes to run 135MPH+... HA!
> I would trust Talbir on this one Franco... Invest in a proper spacer
> like the H&R's Talbir mentioned. It's very cheap insurance.
>
> Sam
> ------------------------------
>
> Message: 7
> Date: Thu, 23 Jun 2005 06:37:07 +0000
> From: "Sharan Bains" <sharanbains at hotmail.com>
> Subject: RE: [W126 Coupe] need bolts for 25mm spacer
> To: mbcoupes at mbcoupes.com
> Message-ID: <BAY17-F297125C317AC30AA867460BFEA0 at phx.gbl>
> Content-Type: text/plain; format=flowed
>
> The safety concern would be the shaft length of the bolt - if the  
> shaft
> length is 70mm, and only 20mm of this is being tightened into the hub,
> then
> you have 50mm f shaft protruding.
>
> The longer the shaft, the greater the risk of it breaking under  
> stress.
>
>
> talbir
>
>
>> From: "Franco" <dusktilldawn at cox.net>
>> Reply-To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>
>> To: <mbcoupes at mbcoupes.com>
>> Subject: RE: [W126 Coupe] need bolts for 25mm spacer
>> Date: Wed, 22 Jun 2005 15:44:02 -0700
>>
>> Talbir,
>>
>> no these spacers do not bolt onto the hub
>> and my wheels are aftermarket
>> so what safety concern do you see?
>>
>>
>> ciao,
>> Franco
>> 1987 560SEC
>> The MB Coupes Website!
>> W126 SEC Mailing List
>> Postings remain property of MB Coupes, L.L.C.
>>
>
>
>
>
> ------------------------------
>
> The MB Coupes Website!
> W126 SEC Coupes
> Postings remain property of MB Coupes, L.L.C.
>
> End of MBCOUPES Digest, Vol 8, Issue 21
> ***************************************
> The MB Coupes Website!
> W126 SEC Mailing List
> Postings remain property of MB Coupes, L.L.C.
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pairlist.net/pipermail/mbcoupes/attachments/20050624/9d344149/attachment.html