[W126 Coupe] Jack's wheel saga.

[Matt Petersen]

So do mine. It's just one of those things.

Matt.

-----Original Message-----
From: mbcoupes-bounces at mbcoupes.com
[mailto:mbcoupes-bounces at mbcoupes.com] On Behalf Of Chiappinelli, Joseph
Sent: Thursday, 3 February 2005 2:49 a.m.
To: Mercedes Coupes Mailing Lists
Subject: RE: [W126 Coupe] Jack's wheel saga.


Not suggesting there is no benefit, just questioning the cost/benefit
relationship. By the way, for whatever reason, my front tires have
always worn more rapidly than my rears on the four 126 models I've owned
over many years. 

J.Chip

-----Original Message-----
From: mbcoupes-bounces at mbcoupes.com
[mailto:mbcoupes-bounces at mbcoupes.com]On Behalf Of Sharan Bains
Sent: Wednesday, February 02, 2005 8:24 AM
To: mbcoupes at mbcoupes.com
Subject: RE: [W126 Coupe] Jack's wheel saga.



The tool for those OZ wheels IS held by certain refurbishers. Tools
required 
to open almost every other multi-piece wheel made by BBS, OZ and Ronal
etc, 
ARE readily available, since they usually require 12-point sockets or 
12-point spline bits, which are available anywhere and everywhere.

It's just these OZ 3-piece wheels that have a rare fastener head - but I

managed to source the tool, so with a little effort, anyone else can
too.

My original statements still hold true, namely :

1) components can be replaced or re-furbished on multi-piece wheels
rather 
than having to dish the whole wheel
2) higher quality AND lighter metal is used, meaning lower unsprung
weight 
=> better handling
3) they look miles better than a single piece wheel

Fine, point 3 is subjective. But points 1 and 2 are fact. It's why all
the 
tuners, AMG, Brabus, Kleeman fit multi-piece wheels to their products.
It's 
why BBS, OZ Racing etc, the best wheel designers in the world invest so
much 
money on developing multi-piece wheels.

Aftermarket wheels are always heavier and lower in quality.

To suggest there is no benefit to multi-piece wheels is about as true as

suggesting front tyres wear out quicker than rear ones on a RWD car. It
just 
doesn't stack-up.



Talbir





>From: "Chiappinelli, Joseph" <joseph.chiappinelli at mirant.com>
>Reply-To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>
>To: "Mercedes Coupes Mailing Lists" <mbcoupes at mbcoupes.com>
>Subject: RE: [W126 Coupe] Jack's wheel saga.
>Date: Wed, 2 Feb 2005 07:29:12 -0500
>
>Ah...the "benefits" of multi-piece wheels.
>
>-----Original Message-----
>From: mbcoupes-bounces at mbcoupes.com 
>[mailto:mbcoupes-bounces at mbcoupes.com]On Behalf Of Sharan Bains
>Sent: Wednesday, February 02, 2005 4:09 AM
>To: mbcoupes at mbcoupes.com
>Subject: RE: [W126 Coupe] Jack's wheel saga.
>
>
>Hi Jack,
>
>The tools required to open the 3-piece OZ Racing AMG wheels are not for
>sale
>anywhere in the world.
>
>Only a few wheel refurbishers have the tools required. The attached 
>image shows the tools set that I have - I was lucky to get in touch 
>with a contact on the inside to acquire these tools.
>
>The fastener heads are 8mm 10-point and the fastener nuts on the rear 
>are 10mm 10-point.
>
>BTW, in a previous post you said the wheel shop had the wheels split - 
>how could this be possible if they do not have the tools to undo the 
>fasteners ?
>
>Some cowboys grind out the original OZ fasteners and replace them 
>standard ones - beware ! The fasteners used by BBS and OZ are bespoke 
>for multi-piece wheel usage - the fasteners have a tensile strength of 
>10.9, i.e. they can withstand a force of 150,000 psi. Standard 
>fasteners should not be used on multi-piece wheels - only ever use the 
>original fasteners. You can see the numbers '10.9' engraved on each 
>fastener head.
>
>You'll need to find a refurbisher who has the tools set for these 
>fasteners
>- someone who does AMG/Porsche wheels for a living. I don't think
you're
>going to find the tools anywhere.
>
>Talbir
>
>
> >From: "Jack Emery" <jemery at wn.com.au>
> >Reply-To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>
> >To: <mbcoupes at mbcoupes.com>
> >Subject: [W126 Coupe] Jack's wheel saga.
> >Date: Wed, 2 Feb 2005 16:00:26 +0800
> >
> >When I went to collect my wheel I was told that the repairer had no
>wrench
> >to fit the little stud bolts around the rim.His whole business is 
> >wheels, but he said he had not seen these wheels before. The 
> >studbolts have 8 flutes in the head. Does anyone know where to get a 
> >wrench, please?
> >      Jack OZ
> >
> >
> >The MB Coupes Website!
> >W126 SEC Mailing List
> >Postings remain property of MB Coupes, L.L.C.
>
>The MB Coupes Website!
>W126 SEC Mailing List
>Postings remain property of MB Coupes, L.L.C.


The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C.
The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C.