[W126 Coupe] main air flap is bass ackwards
Dick Spellman
mbcoupes@mbcoupes.com
Thu, 30 Dec 2004 12:36:47 -0500
Richard:
I am not in front of my notes today. I went through this same process on
(2) MB's where I replaced the elements in one and then learning of George's
kit rebuilt the elements in the other. Placement of those dual vacuum lines
is important. DO you have a way of reading the color band on the lines to
confirm proper placement? Or where you just replaced the one element, can
you swap the lines to see if that changes the 'off' state placement of the
flap?
Only other thing I would recommend is to use a vac tester if you have one
handy to see if the other element has a leak that you can not hear just to
see if it holds the vacuum.
Dick