[LargeFormat] Light bar across Quick Load

[Ted Harris]

The latest version of the Kodak Readyload Holder ... the one  
specifically designed for single sheet readyloads that comes in the  
pouch .... works fine with Quickloads as well as Readyloads, at lest  
that has been my experience and that of all others I know who have  
tried.


On Jul 21, 2005, at 5:01 PM, Jim Brick wrote:

> At 01:31 PM 7/21/2005, Steve Bell wrote:
>
>> The Quick Loads were used in a Kodak
>> holder. I've probably only used around 20 Quick Loads and never  
>> seen this
>> before. The camera used was a Toyo 45A. Any ideas?
>>
>
>
> Quick loads, for the most part, are incompatible with the Kodak  
> Readyload back. This has been a problem since the beginning of  
> Quick & Ready loads. Sometimes they work, sometimes they don't. One  
> major problem with using QuickLoads in a Kodak back is that they  
> can get caught in there. The metal end hangs up to where you have  
> to disassemble the ReadyLoad holder in order to get the Quickload  
> out. ReadyLoads don't work so great in the Quickload holder either.  
> But both Readyloads and Quickloads work perfectly in the Polaroid  
> holder. My local dealer showed me the aforementioned problems and I  
> remember an article in, perhaps, View Camera magazine, explaining  
> the problem(s).
>
> I personally only use Quickloads and only use the Quickload holder.
>
> Jim
> _______________________________________________
> LargeFormat mailing list
> LargeFormat at f32.net
> http://www.pairlist.net/mailman/listinfo/largeformat
>