[LargeFormat] 11x14 Korona
Jim Hemenway
largeformat@f32.net
Wed Oct 15 09:28:25 2003
Ahh! Now I know what you mean... they don't exist in my 11x14, just a
narrow channel machined into the wooden rails.
Jim - http://www.hemenway.com
Clive Warren wrote:
> At 23:12 14/10/2003 -0400, Jim Hemenway wrote:
>
>> Clive Warren wrote:
>>
>>> Snip< The main problem I have found with the Koronas is featured in
>>> the auction camera. Once the brass rail inserts open up it is a
>>> difficult job to close them up again. As soon as there is a lot of
>>> play between the brass rails and the standard runners, making the
>>> camera rigid again is a bit of a challenge. I had considered
>>> stripping out the brass rails and machining an insert that is thicker
>>> than the original but the woodwork involved would probably require
>>> the wooden rails to be completely disassembled.
>>
>> Clive:
>>
>> When you refer to the brass rails, do you mean the strip gears inset
>> into the wooden extension rails?
>>
>> If so, I just stuck em back down by replacing the tiny short nails with
>> new slightly thicker ones which I first dipped into glue.
>
>
> Jim,
>
> These are the narrow brass inserts in the sides of the rail that the
> standard runners fit into and are very difficult to service.
>
> Cheers,
> Clive