[LargeFormat] 11x14 Korona
Jim Hemenway
largeformat@f32.net
Tue Oct 14 23:15:22 2003
Clive:
When you refer to the brass rails, do you mean the strip gears inset
into the wooden extension rails?
If so, I just stuck em back down by replacing the tiny short nails with
new slightly thicker ones which I first dipped into glue.
Jim
Clive Warren wrote:
>Snip<
> The main problem I have found with the Koronas is featured in the
> auction camera. Once the brass rail inserts open up it is a difficult
> job to close them up again. As soon as there is a lot of play between
> the brass rails and the standard runners, making the camera rigid again
> is a bit of a challenge. I had considered stripping out the brass rails
> and machining an insert that is thicker than the original but the
> woodwork involved would probably require the wooden rails to be
> completely disassembled.