[LargeFormat] BW 4x5 processing

[markb]

Frank,
for E6 processing, the water needs to be at 40 C. I use 0.5L per wash

----- Original Message -----
From: "Frank Filippone" <red735i@earthlink.net>
To: <largeformat@f32.net>
Sent: Tuesday, July 15, 2003 9:35 PM
Subject: RE: [LargeFormat] BW 4x5 processing


> Seems irrelevant if the thing won't fit.  Which was my point.
>
> As far as wash water, unless you are in some form of strange environment,
20
> changes of water at .6L per change is 12L or about 3 gallons.  Seems
pretty
> easy to use room temp water.. or use ice to cool down hot water from the
> tap.
>
> The issue of temp of wash water comes from issues of reticulation.  Yes, I
> did make a mistake once.  But I was 13 at the time....  learned a lot
since
> them....  Use room temp water and don't sweat the issues.....
>
> Frank Filippone
> red735i@earthlink.net
>
> > Get a JOBO CPE2 Plus.   The CPA and CPP models are too big, unless the
> space
> > will not share with other equipment.
> >
> The CPE2 plus won't take expert reels. It is also easier to keep the 9
> litres or so of washing water upto temperature with a CPA.
>
>
>
> _______________________________________________
> LargeFormat mailing list
> LargeFormat@f32.net
> http://www.pairlist.net/mailman/listinfo/largeformat