[KOML] Using the ground glass and tubes

[Martyn, Rick]

I would think that a VERY sturdy and well tightened tripod should be
sufficient if care is used when during the removal/replacement process.
Might also try hanging some weight below the tripod for added stability.

Rick M. 

-----Original Message-----
From: koml-bounces at koni-omega.org [mailto:koml-bounces at koni-omega.org]
On Behalf Of Barry F
Sent: Tuesday, March 01, 2005 10:31 AM
To: koml at koni-omega.org; koni-omega at snoopy.cmagic.com
Subject: [KOML] Using the ground glass and tubes

I have managed to procure a Koni-Omega close-up kit for my RO200 (or for
my Rapid, for that matter), consisting of a ground glass attachment, a
3X Omegaflex magnifier that attaches nicely to the ground glass
attachment, and two 10mm tubes, which can be used in tandem. So I was
wondering if anyone had any sage advice on how to use these,
particularly how to maintain focus after attaining it, while removing
the loupe, ground glass, and replacing the back.  Thought maybe it could
provoke at least a little discussion.
Best,
Barry

_______________________________________________
KOML mailing list
KOML at koni-omega.org
http://www.pairlist.net/mailman/listinfo/koml