[flow-tools] time in flow-data wrong?

[Horatio B. Bogbindero]

Surlignage Mark Fullmer <maf@eng.oar.net>:

> On Mon, Jun 03, 2002 at 12:49:38PM +0800, Horatio B. Bogbindero wrote:
> > Surlignage Mark Fullmer <maf@eng.oar.net>:
> > 
> > > Are you using a distributed switching platform (75XX) with old IOS?
> > > 
> > no really sure. the device here is a cisco 3662. the IOS is 12.1(3a)T1.
> > but, the devices does not support 'ip cef distributed'
> > 
> > > The VIP's have their own clock which for a long while was not synch'd
> > > to the RP.
> > > 
> > may i ask what a VIP and RP is? thanks.
> 
> Distributed switching.  In a 75XX each VIP2 card has it's own CPU which
> when CEF is enabled can forward packets.  The main processor (RP) handles
> the non distributed traffic, routing protocols, etc.
> 
> For some reason I remember 1993 being what a Cisco defaults to without
> a clock set.  Does 'sh clock' give expected results?
> 
'sh clock' gives the proper date on the cisco abiet with the wrong timezone 
which does not really matter to us at this point.

we are planning to upgrade the IOS but would like to check first if IOS is 
really the culprit. 

thanks.

-------------------------------------------
William Emmanuel S. Yu
Ateneo Campus Network Group (AteneoCNG)
email  :  wyu at ateneo dot edu
web    :  http://CNG.ateneo.net/wyu/
phone  :  +63(2)4266001-4186
GPG    :  http://CNG.ateneo.net/wyu/wyy.pgp